Error Messages - Brady TLS2200 User Manual

Error Messages

Error Message
Error in CheckSum
Error Head Open
Error No Label
Present
Error Out of Label
64
Cause
The software was
improperly installed on
™
your TLS2200 printer.
Print head is unlocked.
™
The TLS2200 printer is
not seeing the marker's
smart cell located on the
side of the marker roll.
The roll of markers is
inserted properly in the
material guides,
however, they are either
not feeding properly or
the roll has run out of
markers.
Corrective Action
Contact BRADY's Technical Support
Group.
1. Move the lever on the right side of the
™
TLS2200 printer to the lock position.
Press the <Enter> or <Delete>
2.
button to clear the display.
1. Verify the smart cell is making contact
with the left material guide.
2. Be sure the right material guide is
adjusted as far to the left as possible
for the roll of markers used. The
material guide should be locked into
the proper notch in the guide plate.
3. Be sure the marker roll is snapped
evenly and firmly in the label roll
cradle.
Press the <Enter> or <Delete>
4.
button to clear the display.
Press the <Enter> or <Delete>
1.
button to clear the display.
2. Install a new marker roll if the roll has
run out.
If:
•
you have not run out of markers, the
markers are not feeding properly. Be
sure to insert the leading edge of the
markers into the material path until
they hit the feed roller. Be sure the
leading edge of the marker is straight.
If not, cut the edge with a pair of
scissors.
•
the markers are present and printing,
they may have become skewed or
jammed. To fix, press the <Feed> key
to recalibrate or open the print head
and pull the markers through to clear
the jam.
™
TLS2200 Thermal Transfer Printer User Manual