Brady TLS2200 User Manual page 23

Option
Expansion
CheckSum
Continuous
The Continuous Menu contains the following user options:
Option
Terminal
Block
Banner
Fixed Length
Style
The Style Menu contains the following user options:
Option
Rotation Sets the rotation in one of four orientations. 0º, 90º, 180º, and 270º. Default
orientation is dependent on the marker roll loaded in the unit.
Always select the rotation value before entering the text for your label. A
change to the rotation value causes the following to occur:
•
•
•
Note: Rotation option is not supported for BRADYSleeve, PermaSleeve, and
pre-printed marker parts (defaults to 0º).
H Justify Sets the horizontal justification of the legend. Options are: Left, Center, and
Right. The marker roll loaded in the unit determines the default setting.
V Justify Sets the vertical justification of the legend. Options are: Top, Center, and
Bottom. The marker roll loaded in the unit determines the default setting.
14
Choices of Width Size adjustment (e.g., double of a 2mm width bar
code equals a 4mm width bar code):
• Once
• Double
• Triple
• Quadruple
On/Off. Applicable for Code_39. Default = Off.
Adjusts the terminal block repeat value. Setting ranges from 5 mm
(0.19685 in) to 46 mm (1.81102 in). <
increase/decrease value by 0.125 mm increments (1 dot). <Shift> +
< > and <Shift> + <
▲
increments (8 dots).
Sets the orientation of the legend text on the banner. Toggles between
vertical and horizontal.
Adjusts the maximum length of the banner. Setting ranges from 32
mm (1.02362 in) to 305 mm (12.28346 in). <
increase/decrease value by 13 mm (.51 in) increments. <Shift> +
< > and <Shift> + <
▲
increments.
All characters and lines on a legend are deleted.
The cursor moves to the first character position on line one.
The font is set to the default size for the marker.
Description
Description
> and <
▲
> increase/ decrease value by 1mm
▼
> increase/ decrease value by 26 mm (1.02 in)
▼
Description
™
TLS2200 Thermal Transfer Printer User Manual
> keys
▼
> and < > keys
▲ ▼