Setup Menu Options - Brady TLS2200 User Manual

Setup Menu Options

The Setup Menu contains seven sub-menu options for formatting and printing your labels and
setting your language preference for the menus and prompts. Many of these options provide
you with ways to customize the formatting of your labels. Refer to the Setup Menu Tree
section on page17.
Printer
The Printer Menu contains the following user options:
Option
Top Margin Adj.
Left Margin Adj.
Cut Feed Adj.
Peel Time
Burn Temp
Clean Printer
Barcode
The Barcode Menu contains the following user options:
Option
Bar Height
Human
Readable
Bar Code Type
™
TLS2200 Thermal Transfer Printer User Manual
Adjusts first vertical print position from top of label. Values range
from -0.625 mm (-0.0246 in) to +1.375 mm (0.05412 in).
Adjusts first horizontal print position from left edge of label.
Values range from -0.625 mm (-0.0246 in) to +1.375 mm
(0.05412 in).
Adjusts vertical cut position between labels. Values range from -1
mm (-0.03936 in) to +1 mm (0.03936 in). The <
increase/decrease value by 0.125 mm increments (1 dot).
Determines how long (in seconds) a label remains in peel position
before moving back to cut position. Ranges from 2 to 9 seconds.
Default = 5 sec.
Note: Peel time option is not supported for BRADYSleeve and
PermaSleeve marker parts.
Determines the print density on the label. Setting ranges from -5
(lightest) to + 5 (darkest). Default = 0
Performs printer cleaning routine. Use this option with the cleaning
card shipped with the unit.
Sets the height of the Code 39 barcode. Setting ranges from 1 mm
(0.03937 in) to 26 mm (1.02362 in). Default = 1 mm. Narrow bar
width = 2 dots (.25 mm). Barcode Ratio = 2 to 1.
Determines whether the barcode is printed along with human readable
text. Toggles between on and off. Font size ranges from 2 (5 point) to
9 (14 point). Default = off.
Determine type of bar codes:
• Code_39
• Code_128
• ITF_25
• Codabar
Description
Description
> and < > keys
▲ ▼
13