Brady TLS2200 User Manual page 66

11. Press the <
12. Press the <
13. Press <Func> + <Exit> to exit back to the Text Editor screen.
14. With the cursor highlighted on line one, press <Shift> + <
font size from 9 to 11.
15. Enter BRADY on line one, then press <Enter>.
16. Press the <Barcode> key to toggle the Legend Type for line two from Text to Barcode
mode (B is displayed on the Status Bar).
17. Enter A101 on line two.
18. Press <Func> + <Save>.
19. Press <Legend Clear> to clear text from line 2 only.
20. Enter B101 on line two.
21. Press <Func> + <Save>.
22. Turn the battery power switch off to deactivate List4.
To select (recall) List4 as the active list:
1. Turn the battery power switch on.
Press <List>.
2.
With the cursor on Select, press <Enter>.
3.
Use the <
4.
appears, followed by the Text Editor screen. List4 is now the active list.
Press <List>.
5.
Press the <
6.
When the "No. of Copies?" prompt appears, enter 1, then press <Enter>.
7.
™
TLS2200 Thermal Transfer Printer User Manual
> or < > keys to toggle the human readable text ON, then press <Enter>.
▲ ▼
> or < > keys as needed to set the font size to 6, then press <Enter>.
▲ ▼
> and < > arrows to select List4, then press <Enter>. The part number
▲ ▼
> key twice to select Print, then press <Enter>.
▼
> two times to increase the
▲
57