Continuous Printing-Banners; Default Font Size - Brady TLS2200 User Manual

Continuous Printing—Banners
You can create banners using the TLS2200
including labeling larger conduit.
New continuous label parts designed for banner printing such as PTL-8, PTL-42, and
PTL-43 can only be used with version 2 software or higher. If you are using version 1
software, you will not be able to enter text on the editor screen.
To create a banner, complete the following steps:
Press the <Func> + <Setup> keys to access the Setup Menu.
1.
Press the <
2.
Press the <
3.
Use the <
4.
Press <Func> + <Exit> to exit back to the Text Editor screen.
5.
6. Enter the banner text as needed and print your label. The first banner label printed will
have an additional 1" of material fed before the text prints. After the first banner label
prints, press <Feed> and then cut to avoid excess waste on subsequent labels.
Banner Rotation
Banners can be printed either horizontally or vertically.
220 VOLTS
Horizontal Banner

Default Font Size

For continuous printed labels (banners), the default font size is the largest font that prints on
the selected marker width in horizontal orientation.
34
> key twice to select Continuous, then press <Enter>.
▼
> key once to select Banner, then press <Enter>.
▼
> and < > keys to select the desired rotation, then press <Enter>.
▲ ▼
2
2
0
V
O
L
T
S
Vertical Banner
™
printer. Banners have a variety of industrial uses,
™
TLS2200 Thermal Transfer Printer User Manual