Unpacking Your Saw
Use care when unpacking your saw to prevent damage to any of the saw components or accessories. Remove
all packing materials and accessories before removing the saw from the shipping pallet. If the saw or the accessories
have been damaged during shipping, report the damage to your shipper before proceeding with unpacking. Read
and understand this manual fully before assembling and operating your saw.
The package for your saw includes the following items:
1.
One table saw with motor.
2.
Two extension wings (the right extension wing is pre-installed).
3.
One blade guard and splitter with anti-kickback pawls.
4.
One riving knife (pre-installed).
5.
One 10 inch saw blade.
6.
One zero-clearance table insert.
7.
One brake cartridge for a 10 inch blade.
8.
One brake cartridge key.
9.
One miter gauge.
10. Two blade wrenches.
11. Three hex key wrenches.
12. One plastic bag containing assembly hardware.
13. Two Bypass Switch Keys.
14. One owner's manual.
15. Two hand wheels (the handle on the tilt hand wheel is not pre-installed)
Other accessories such as a fence and rails, an extension table, extra brake cartridges, etc., are packaged
separately.
SawStop 10" Professional Cabinet Saw
13