Removal Of Bioclip Plug (Combi) - Husqvarna 155, 155 AWD Operator's Manual

Removal of BioClip plug (Combi)

To change a Combi unit from BioClip function to
cutting unit with rear ejection, remove the BioClip
plug located under the unit with three screws.
1. Put the unit in the service position, see "Placing
in the service position".
2. Remove the three screws holding the BioClip
plug, and remove the plug.
3. Tip: Fit three full-thread screws M8x15 mm in
the screw holes to protect the threads.
4. Replace the unit in normal position.
Fit the BioClip plug in the reverse order.
MAINTENANCE
Service position
Removal of BioClip plug
6017-227
8009-289
47
English –