Cleaning - Husqvarna 155, 155 AWD Operator's Manual

Cleaning and washing
Clean the machine directly after use.
It is much easier to wash off grass cuttings before
they dry.
Oily dirt can be removed using a cold degreasing
agent. Spray on a thin layer.
Rinse at normal water pressure.
Do not direct the jet towards electrical components
or bearings.
Do not rinse hot surfaces, for example, the engine
and exhaust system.
It is recommended that you start the engine and run
the mower for a short period after cleaning, so that
any remaining water is blown off.
Lubricate the machine if necessary after cleaning.
Carry out extra lubrication when the bearings have
been exposed to a degreaser or a water jet.
IMPORTANT INFORMATION
Avoid using a high pressure washer or a
steam cleaner
There is a major risk of water penetrating into
bearings and electrical connections. Corrosion
attack can result, which will lead to running
problems. Cleaning additives generally aggravate
the damage.
30
– English
MAINTENANCE
8009-741