Operation; Before Starting; Starting The Engine - Husqvarna 155, 155 AWD Operator's Manual

IMPORTANT INFORMATION
The air intake grille in the engine cover
behind the driver's seat must not be
blocked by, for example, clothing, leaves,
grass or dirt.
Impaired cooling of the engine. Risk of
major engine damage.

Before starting

• Read the safety instructions and information on
the location and function of the controls before
starting (see pages 5-14).
• Conduct daily maintenance before starting (see
maintenance schedule on page 20).

Starting the engine

1. Lift up the cutting unit by pulling the lever
backwards to locked position (transport position).
2. Apply the parking brake. This is done as follows:
• Press down the parking brake pedal (1).
• Press in the lock button on the steering
column (2).
• Release the parking brake pedal while
keeping the button pressed in.
Rider 155 AWD. The engine can not be
started if the parking brake is not pressed down.
The parking brake lock is automatically disengaged
when the parking brake pedal is pressed down.
Cold engine:
3. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
22
– English

OPERATION

1
2
1
2
8009-431
6007-001H
6017-011
3
6007-004H