Husqvarna 155, 155 AWD Operator's Manual page 25

Warm engine:
4. Set the throttle control midway between position
1 and 2.
5. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
10 seconds at a time. If the engine does
not start, wait about 60 seconds before
trying again.
6. When the engine has started immediately
release the ignition key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is an odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.
OPERATION
1
2
STOP START
STOP START
3
6007-005H
6007-006
6007-007
23
English –