Safety Precautions - QUORION QMP 2000 series User Manual

1. Safety Precautions

This section presents important information intended to ensure safe and effective use of the QMP 2000
series. Please read this section carefully and store it in an accessible location.
•
Be sure the voltage of your main power net corresponds to the input voltage printed on the rating plate
of the system. Do not connect power adapters from other manufacturers. Use this product only for its
intended application. Improper usage may lead to equipment damage, fire, or shock.
•
Be sure your power cable meets the relevant safety standards and includes a power-system ground
terminal (PE terminal). Otherwise shock may result.
•
Never attempt to stretch the cables to enable a connection. The power cable and DC cable must have
adequate slack at all times during use.
•
Do not connect to electrical outlets close to devices that generate voltage fluctuations or electrical
noise. In particular, stay clear of devices that use large electric motors.
•
Never attempt to repair this product yourself. Improper repair work can be dangerous.
•
Never disassemble or modify this product. Tampering with this product may result in injury, fire, or
electric shock.
•
Be sure to set this unit on a firm, stable, horizontal surface. Product may break or cause injury if it falls.
•
Keep the system away from all conditions, which may cause damage, fire or accidents: Direct sunlight,
high temperature and humidity, extreme changes in temperature, heating and cooling equipment, or
humidity, volatile materials, high levels of dust, vibration, and impact.
•
Keep away any liquids from the system. If water or other liquid spills into the equipment, unplug the
power cable immediately, and then contact your dealer for advice. Continued usage may lead to fire or
shock.
•
To prevent possible harm to the environment or human health please separate this product from other
waste streams to ensure that it can be recycled in an environmentally sound manner. For more details
on available collection facilities please contact your local dealer where you purchased this product.
•
Switch off the cash register before you change the thermal paper roll.
•
Switch off the cash register before connecting or disconnecting any peripheral devices.
5