Programming; Programming Of Date And Time - QUORION QMP 2000 series User Manual

11. Programming

The programming of the QMP 2000 series is classified in two parts: configuration and file programming.
First the requested functions must be activated in the configuration. This will allocate the memory for each
function. Then the pre-configured functions can be filled with user data in the programming. Please note
that the configuration can only be done by PC with the software QProg. It is not possible to configure the
POS systems directly. However, the file programming can be done directly in X, Z or P mode. All functions,
which were configured before, can be programmed.
This manual only gives a general overview of the programming. If you have further questions please check
our website www.quorion.de for special programming manuals or ask your local QUORION dealer. He will
gladly help you.

11.1 Programming of Date and Time

Programming the date and time is achieved in mode P, using the system keys "DATE" and "TIME". By default
2
you will find it on the function keys "Table Split" and "Invoice" at QTouch or "CARD" at QMP 2000 series.
Enter the date in the format DDMMYYYY and confirm with the "DATE" key. The new date will be activated
immediately.
Enter the time in the format HHMM and confirm with the "TIME" key. The new time will be activated
immediately.
Example: Set new time 8:00 (only in P):
8 0 0
CARD
TIME
38