Table of contents 1 Safety Precautions ....................5 1.1 Overview ............................5 1.2 General safety precautions ......................6 2 QMP 50 ....................... 7 2.1 Intended use ..........................7 2.2 The cash register and its components ....................8 2.3 Technical data ..........................9 2.4 Interfaces and connections ......................
Page 4
10 Instructions for maintenance ................21 10.1 Cleaning ............................. 21 11 Information on the Electromagnetic Compatibility and Safety ......22...
1 Safety Precautions 1.1 Overview At specific places in this documentation you can find separated information in the form of hints. Below the different types are explained. »Warning« Warning! Indicates a potentially imminent danger that may result in death or serious injury if not avoided.
– Always connect the power cable to the device before connecting it to the wall outlet. – Only connect the device to a socket with a grounded protective conductor. – Only use original QUORiON components or components and peripherals approved by QUORiON.
Keep this manual and distribute the product only with the manual and the accessories supplied to third parties. Any other use than the one described is not as intended. QUORiON Data Systems does not accept liability for any damages, functional impairments or injuries resulting from improper use.
2.3 Technical data Processor 32 bit ARM 966E Program Memory 1 MB Flash ROM Memory Data Memory 2 MB Flash ROM Working Memory 96 kB SRAM (battery buffered) Operator Display 192 x 32 graphical Display Customer Display 192 x 32 graphical Keyboard Internal 36 keys raised...
2.4 Interfaces and connections The QMP 50 series is equipped with two RS232, one USB device and one cash drawer interfaces. The RS232 ports are used to connect peripheral devices like scanner, display, QuoriLog etc. The USB port is only prepared for PC communication.
If so, connect the power pack to. The power plug is at the rear next to the interfaces. Now connect the power supply with the power circuit and turn on the QMP 50 series with the main switch.
To remove the paper roll, follow the steps below: 1. Open the printer cover 2. Press the Easyload lever and fold the Easyloadcover up. 3. Remove the paper roll 4. Close the printer cover Note: Do not pull out the remaining paper in the opposite direction of the paper feed! 3.3 Switch ON / OFF To switch the cash register ON or OFF, please press and hold this button 3 seconds.
Some keys therefore may not be found within the keyboard layout of your POS system or are labeled differently. For questions regarding the individual configuration of your POS system, consult the QProg documentation, the documentation on our website www.quorion.de or your local QUORiON dealer.
4.2 Operating modes The operating modes control the operation of your Cash Register. There are five different modes for various functions. The selection of an operating mode can be done either by soft key on keyboard. Soft key RXZMP Mode Display Function –...
Page 15
Key Label Key Name Key Function - used to enter multiplications Multiplication - used to switch the operating mode of the cash register R-X-Z-M-P - used to access preset PLU items Department - used to enter items to the respective departments Received on Account - used to record payments to the drawer Paid Out...
5 Sign in and Register 5.1 Sign in a Clerk/Sales Person To sign in a clerk or sales person you may use either a Dallas-Key (optional) or the keyboard. To sign in, simply place your key on the respective magnetic lock. If you remove the key, you will automatically log out.
Register 3 x the scan code 4912345678901: Scan 4912345678901 5.5 Tendering in Local Currency Any sale will be closed by entering a payment media key. 1.00 Euro CASH payment: CASH total 1.00 Euro CARD payment, short CASH payment: CASH CARD total 5.6 Receipt copy You can print a copy of the last receipt via the key Subtotal after a sale.
6.3 Void The Void function is used to clear certain items from the current receipt. Void PLU with scan code 4912345678901: Scan VOID 4912345678901 Void 3.50 EUR from department 1: Please note that only those amounts can be voided, which were previously entered.
7 Discounts, RA and PO 7.1 Percentage Discount/Surcharge Discounts are price deductions on single items or on the sub total of the receipt. Likewise it is also possible to order surcharges. Percentage discount of 10% to PLU 2: % (–) 7.2 Amount Discount/Surcharge Similarly, it is possible to use amount rebates.
8 Reports The POS system offers a wide range of reports to collect and monitor your sales data. All reports can be performed as X or Z. Both types contain the same information. The X-report can be printed as a temporary report at any time, because the report data will not be cleared.
9 Programming This manual only gives a general overview of the programming. If you have further questions please check our website www.quorion.de for special programming manuals or ask your local QUORiON dealer. He will gladly help you. 9.1 Programming of Date and Time Programming the date and time is achieved in programming mode P.
A "conformance explanation" in compliance with the directives and standards cited on top has been delivered and can be reviewed with the QUORiON Data Systems GmbH. QUORiON Data Systems GmbH, An der Klinge 6, 99095 Erfurt, Germany (E-mail: info@quorion.de; web: www.quorion.de) Publishing Information...