Table of Contents
Advertisement
Save This Installation & Operations Manual
GENERAL INFORMATION
SAFETY PRECAUTIONS
SAFETY NOTICE: The Stove must be properly installed in order to prevent the possibility of a
house fire! These installation instructions must be strictly observed! The Maintenance
schedule must be followed as described in this manual. Failure to follow instructions may
result in property damage, bodily injury or even death.
The Stove's exhaust system works with negative combustion chamber pressure and a slightly
positive chimney pressure. Therefore, it is imperative that the air intake and exhaust system be
airtight and installed correctly. Do not install a flue damper in the exhaust vent of this unit.
Do not connect this unit to a chimney flue serving another appliance.
Contact the local building officials to obtain a permit and information on any local installation
restrictions and inspection requirements.
The word "Stove" as used in this manual is interpreted to mean a "Multi-Fuel Stove" approved
for the fuels listed in this manual. This model is not intended as the sole source of heat.
The stove has been independently tested and listed by Warnock Hersey Laboratories in
accordance with the proposed ASTM Standards and the applicable portions of UL 1482 and
ULC S627/B366.2, and Oregon Administrative Rules 814-23-901 through 814-23- 909, stating
requirements for installation as a stove, heater or hearth insert for masonry, metal and zero
clearance fireplaces and for mobile home installations. The safety-listing label is located on the
back of the stove.
Since Even Temp Company has no control over the installation of the Stove, Even Temp
Company grants no warranty, implied or stated, for the installation of the Stove and assumes no
responsibility for any special, incidental or consequential damages.
BUILDING PERMIT
DEFINITION OF "STOVE"
SAFETY TESTING
DISCLAIMER OF WARRANTY
MANUFACTURED BY:
Even Temp Inc
Hwy 34
Waco, NE, 68467
Lincoln SCR Manual
8
Hide quick links:
Advertisement
Table of Contents
