St. Croix SCR Installation & Operation Manual page 33

Revolution Multi-Fuel Pot – Exploded View
The main components of the Revolution Pot are:
a. The Pot Weldment
b. The Revolving Drum, which is the bottom of the burnpot.
c. The Clinker Cutters
To Disassemble the Pot assembly:
First remove the Retainers and open the hinged Ash Retainer on one side and
1.
the Clinker Cutters on the other.
The drum will now drop out the bottom of the Pot Assembly.
2.
To re-assemble the Pot Assembly reverse the steps above. (Be sure to place the drum with the drive
coupling facing the Revolution gear motor)
Figure 21
Lincoln SCR Manual
33