Mobile Home Installation
Unit must be installed in accordance with the:
Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24
Unit may be installed in a Mobile Home, after the initial sale of the Mobile Home, not for
Recreational Vehicles.
Figure 16
1. WARNING: DO NOT INSTALL IN A SLEEPING ROOM.
2. WARNING: COMBUSTION AIR MUST COME FROM THE OUTSIDE OF THE MOBILE
HOME! FAILURE TO DO SO MAY CREATE NEGATIVE PRESSURE WITHIN THE
MOBILE HOME AND COULD DISRUPT PROPER VENTING AND OPERATION OF THE
PELLET STOVE.
3. CAUTION: THE STRUCTURAL INTEGRITY OF THE FLOORS, WALLS, CEILING
AND ROOF MUST BE MAINTAINED.
Lincoln SCR Manual
26