Table of Contents
Advertisement
VENTING: APPROVED MATERIALS
The Stove requires a venting system approved for pellets by a certified testing lab. Approved
pellet Stove venting materials are: 1) PL vent, a double wall vent with a stainless steel liner; and
2) Single wall rigid or flexible stainless steel pipe. PL Vent and Single wall vent is available
through manufacturers such as (but not limited to): ICC Chimney, Energy Vent LTD, James A.
Ryder, Simpson DuraVent and Selkirk Metalbestos and is carried by many local pellet Stove
dealers. In this manual approved venting will be referred to a "PL vent" or "Single wall vent".
All single wall vent adaptors must be stainless steel.
NOTE: TYPE "B" GAS VENT MUST NOT BE USED IN THE INSTALLATION OF THIS
STOVE
Examples of venting system components follow:
High temperature ceramic roping reduces potential fly ash escaping through joints.
Stainless steel inner liners resist corrosive flue gas damage to the system.
Flex pipe should be stainless steel, 4 ply construction with a total thickness of approx. .07 inches.
Lincoln SCR Manual
14
Hide quick links:
Advertisement
Table of Contents
