Table of Contents
Advertisement
33ISDG Vent Free Gas Fireplace System
The gas log heater must be installed at least 5" above
any combustible flooring material, such as carpeting or
tile, which is closer than 14" to the base of the fireplace.
Figure 8
Noncombustible
Material
Figure 8 -
Minimum Clearance above
Combustible Flooring
FP2775
min clearance above comb floor
Do not operate the unit without the screen
frame panel and canopy installed.
REMOVE SCREEN
Remove fireplace screen by pushing screen frame panel
up and out. Figure 9
NOTE: Fireplace screen must be removed to access log
box and to install canopy.
10
Combustible
5"
Material
FP2775
1"
CLEARANCES and INSTALLATION
Figure 9 -
Remove Fireplace Screen
INSTALL CANOPY
1. Remove the fireplace screen as described in the previ-
FP2786
ous section.
remove screen
2. Align canopy with the holes in the top frame assembly.
Figure 10
3. Install the five (5) screws (in owner's manual packag-
ing) which attach the canopy to the top frame assembly.
Figure 10
4. Tighten all screws. Make sure the canopy is level and
secure. Install the fireplace screen.
Figure 10 -
FP2777
Install Canopy
install canopy
FP2786
FP2777
23D8036
Advertisement
Table of Contents
