Table of Contents
Advertisement
33ISDG Vent Free Gas Fireplace System
31 "
Figure 2 -
Framing Dimensions
If unit is to be "built in," fireplace framing can be built before
or after the appliance is set in place. BE SURE THAT ALL
PACkING MATERIAL HAS BEEN REMOVED FROM
THE UNDERSIDE OF THE UNIT PRIOR TO SETTING
THE FIREBOX IN PLACE. Construct fireplace framing
following Figure 2. Refer to Figure 4 on Page 8 for fireplace
dimensions. The framing headers may not rest directly on
top of the firebox.
The fireplace may be installed directly on a combustible
31 "
floor or a raised platform of an appropriate height. Do
not place fireplace on carpeting, vinyl, tile or other soft
floor coverings. It may, however, be placed on flat wood,
plywood, particle board or other hard surfaces. Be sure
fireplace rests on a solid continuous floor or platform with
appropriate framing for support and so that no cold air can
enter from under the firebox.
6
37 "
1/2"
or 5/8"
Rough
Opening
Height
27 "
238020
DIS33G dims
37 "
1/2"
or 5/8"
Rough
Opening
Height
33 " Rough Opening Width
33 " Rough Opening Width
27 "
FRAMING DIMENSIONS
Rough
Opening
Depth
16"
Rough
Opening
Depth
16"
23D8036
Advertisement
Table of Contents
