Save These Instructions - Magnum Energy MM Series Installation And Operation Manual

Mm series
Hide thumbs Also See for MM Series:
Table of Contents

Advertisement

http://www.wholesalesolar.com/inverters.html
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be
followed during the installation and operation of this product. Read all
instructions and safety information contained in this manual before
installing or using this product.
• All electrical work must be performed in accordance with local, state
and federal electrical codes.
• This product is designed for indoor / compartment installation. It
must not be exposed to rain, snow, moisture or liquids of any type.
• Use insulated tools to reduce the chance of electrical shock or
accidental short circuits.
• Remove all jewelry such as rings, watches, bracelets, etc., when
installing or performing maintenance on the inverter.
• Always disconnect the batteries or energy source prior to installing
or performing maintenance on the inverter. Live power may be present
at more than one point since an inverter utilizes both batteries and AC.
Turning off the inverter may not reduce this risk. As long as AC power
is connected, it will pass thru the inverter regardless of the ON/OFF
power switch.
• Always verify proper wiring prior to starting the inverter.
• Do not operate the inverter if it has been damaged.
• Do not dismantle the inverter; there are no user serviceable parts
contained in this product. Attempting to service the unit yourself could
cause electrical shock. Internal capacitors remain charged after all
power is disconnected.
• No AC or DC disconnects are provided as an integral part of this
inverter. Both AC and DC disconnects must be provided as part of the
system installation.
• No overcurrent protection for the battery supply is provided as an
integral part of this inverter. Overcurrent protection of the battery
cables must be provided as part of the system installation..
• No overcurrent protection for the AC output wiring is provided as an
integral part of this inverter. Overcurrent protection of the AC output
wiring must be provided as part of the system installation.

SAVE THESE INSTRUCTIONS

©2006 Magnum Energy Inc.
http://www.wholesalesolar.com/inverters.html
ii

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm 612gMm 612aeMm 1212aeMm612Mm1212

Table of Contents