Table of Contents
Advertisement
Toshiba Pocket PC e830 User's Guide
DNS (Domain Name System) is a database system that trans-
lates addresses and domain names. For example, a numeric
address like 232.245.021.54 can become something like
cba.com.
WINS (Windows Internet Naming Service) has two functions; one
is a Microsoft Net BIO name server that eliminates the broad-
casts needed to resolve computer names to IP addresses by pro-
viding a cache or database of translations. The other function is
to set the host PC IP address of the previously constructed Net-
work adapter Active Sync partnership.
To set the IP address, Subnet mask and Gateway, tap Start, Set-
tings, Connections, Network Cards, Network Adapters,
IEEE802.11b WLAN Adapter, then IP Address. To set the DNS
or WINS, tap Start, Settings, Connections, Network Cards,
Network Adapters, IEEE802.11b WLAN Adapter, then Name
Servers.
(3) To ping your Toshiba Pocket PC e830 from your host PC. In the
host PC, open the DOS command mode window, type the com-
mand "Ping" followed by the IP address, such as "Ping
140.124.40.112". If you can see the reply from this IP address,
the connection is complete. You are now ready to browse the
Internet on your Toshiba Pocket PC e830 using Internet
Explorer.
C3: How do I check my email on my wireless Toshiba Pocket PC
e830?
(1) Make sure that you can use the ActiveSync function through
USB interface, then make sure you can use the ActiveSync to
receive and send email. For corporate email, please check with
your network administrator for necessary connection settings.
(2) Make sure you have entered the host PC IP address as the
WINS server on your Toshiba Pocket PC e830.
(3) Reset your Toshiba Pocket PC e830 to make the TCP/IP set-
tings take effect and execute the ActiveSync function on your
Toshiba Pocket PC e830.
D. Settings
D1: What is SSID? What should I set in the SSID field?
SSID stands for Service Set Identification, which is the ID to form the
Wireless Network. You can set up to 32 characters in the SSID field.
For the Infrastructure Mode, you should set the SSID the same as
the Access Point been connected with. To create an 802.11 Ad Hoc
Network, the SSID must be the same among stations to enable the
wireless communication within the local area network.
210
Advertisement
Table of Contents
