Table of Contents
Advertisement
You need to choose a proper SSID and channel for the
NOTE
first 802.11 Ad Hoc station. For other stations want to join
the same SSID group, you could only choose the same
SSID as the first station, but the channel does not take
effect. The 802.11 Ad Hoc must enter the proper SSID.
Blank SSID for the 802.11 Ad Hoc Mode is not allowed.
The stations want to join the 802.11 Ad Hoc Network must
have the same SSID and are suggested to have the same
IP Address in the Network group.
D2: Why am I unable to choose the "Channel" field in "Infrastruc-
ture" Mode?
For the Infrastructure Mode, the Channel is decided by the Access
Point. You cannot create a new Wireless Network; only join the exist-
ing Access Point formed Wireless Network.
D3: When should I set the IP address, Subnet mask and Default
gateway settings?
When the Wireless Network does not have a DHCP server, you
should set your own IP address, Subnet mask and Default gateway
for your Wireless Network connection. Otherwise, the OS might set a
different Network group IP address for you and disconnect you from
the Wireless Network.
D4: How can I set the IP address, Subnet mask and Default gateway
settings?
Tap Start, Settings, Connections, Network Cards, Network
Adapters, IEEE802.11b WLAN Adapter, then IP Address to set the
IP address, Subnet mask and Default gateway settings.
D5: What Transmit Rate should I choose for Wireless Connection?
Suggest you to use the "Fully Auto" option in the "Transmission
Rate" field for full Transmission Data Rate range to automatically
adjust the Best Communication Data Rate and to be compatible with
other low speed 802.11 Wireless Device.
E. Security
E1: What is WEP?
Wired Equivalent Privacy (WEP) is a security service, used to pre-
vent unauthorized access to your wireless network.
Chapter 12: Additional Information
211
Advertisement
Table of Contents
