Table of Contents
Advertisement
Toshiba Pocket PC e830 User's Guide
Using the Cursor button
There are two modes for cursor button control,
•
4-direction (upper, lower, right, or left)
•
8-direction (oblique angles are added).
You can select the either of these two modes by tapping Settings, and
then Buttons. In either mode, you can move a cursor (selection display)
on the screen by pressing the upper, lower, right, or left part of the cursor
button. You can select a program to launch by pressing the center part of
the cursor button.
The cursor movement is different depending on the
NOTE
screen. When the cursor is at the right or left side of the
screen, it may not move.
Using the TOSHIBA Scroller
You can move the cursor on the screen by moving the Scroller up and
down, as well as launching a program by pressing the Scroller.
You can also activate the previous window by holding down the Scroller
until the current window closes. To enable or disable this function, select
the mode by tapping Settings, and then Buttons.
The cursor movement is different depending on the
NOTE
screen. When the cursor is at the right or the left side of
the screen, it may not move.
Charging the battery for the first time
When using your Toshiba Pocket PC e830 for the first time, you must
assemble the cradle (see the section that follows, "Assembling the cradle"
on page 35), set the battery switch to the supply side, and then charge the
removable battery with the supplied AC adapter.
34
Advertisement
Table of Contents
