Advanced Settings - Toshiba e830 Series User Manual

Toshiba Pocket PC e830 User's Guide

Advanced Settings

To change an advanced setting, select the desired setting and tap OK.
The default settings are as follows.
Discoverability
Mode
Office Discoverable
Mobile Non-discoverable Non-connectable
Home Discoverable
Other Discoverable
■
In the default setting for Home, the Security Mode is set to Non-secure
and, therefore, unspecified devices may be able to connect to Local
Device. It is recommended that you set the Security Mode to Security
On.
■
If you want to set the Connectability Mode to Non-connectable and
you are operating your Toshiba Pocket PC e830W in an environment
in which there are three or more operating Bluetooth devices, you
should also set the Discoverability Mode to Non-discoverable.
4. Tap the Options menu, then Local Device.
The Device Information screen for Local Device appears.
To change the name of the device, enter the new name in the Device
Name box and tap OK.
■
The default device name is "Toshiba BT."
■
The device name can be a maximum of 248 alphanumeric characters.
■
If the device name exceeds 248 alphanumeric characters, an error
message appears.
The Bluetooth environmental settings are now complete. Refer to the fol-
lowing for additional operations.
■
COM service, see "Using COM service" on page 153.
■
DUN/LAP service, see "Using DUN/LAP service" on page 154.
■
PAN service, see "Using PAN service" on page 155.
■
OPP service, see "Using OPP service" on page 157.
■
FTP service, see "Using FTP service" on page 160.
150
Connectability Security Mode
Mode
Connectable Security On
Security On
Connectable Non-secure
Connectable Security On
Encryption
Yes
Yes
No
Yes