Emergency Calls; Cleaning Your Telephone - Siemens HiPath DX User Manual

Introduction
Using the display menus
The display has an intuitive menu system to help you use your telephone
and set it to your requirements, see page 28.
To close the menu and return to the normal display, press ◄ or ► to
display Exit? and then press . In many cases, if you do not press any
keys for a short time, your telephone will automatically exit the menu.
If you receive a call while using the menu you can answer the call; your
telephone automatically returns to the menu when the call ends.

Emergency calls

Your telephone should have a label, clearly visible, that shows you the
number(s) to dial for the public emergency services and/or your site
specific emergency telephone number. If this is not fitted, contact your
telephone services manager.
Using the handset with a hearing aid
The handset has a special induction coupling for in-ear hearing aids that
have a switch setting marked T. Set the switch on your hearing aid to the
T position, this will give you the best sound quality.
Tone dialling
During a call, if you use the keypad, tones are sent automatically. Tones
are required, for example, for working with voice messaging systems.
Refer to the user instructions for the tone-controlled system for
information about what codes are required. Recorded instructions heard
during the call usually tell you which keys to press.

Cleaning your telephone

Use a damp or antistatic cloth to clean your telephone. If your telephone
is very dirty, use diluted washing-up liquid. DO NOT use cleaners
containing alcohol (such as screen wipes), cleaners which corrode plastic
or abrasive creams.
6