Open Listening; Show Calling Number Or Name - Siemens HiPath DX User Manual

Standard features

Open listening

You can switch your telephone loudspeaker on during a call to allow
colleagues to hear the call. Only you can speak on the call through the
handset.
Setting open listening
During a call:
Press Hands-free for more than
two seconds, do not replace the
handset
Reverting to handset listening
Press Hands-free

Show calling number or name

Your telephone rings
To see the number of the caller,
press
To see the name of the caller again,
press
The calling number may be replaced by an abbreviation:
• VMS - for the voice messaging system;
• ISDN - for external calls;
• OP - for calls from the operator.
14
The hands-free lamp flashes
and the loudspeaker is
switched on
The hands-free lamp goes
out and the loudspeaker is
switched off
<name>
Show calling number?
<number>
Show calling name?
<name>
Show calling number?