Appendix D - Specification - Inteno FG101 User Manual

FG101 User's Guide

Appendix D - Specification

A1.

•
•

•
•
•

•

•
•
•
•
•
•
•

•
•

•
•
•
•

•

•
A2.













Hardware Specifications
LAN Interface
Four port 10/100BaseT Ethernet Switch (4 * RJ-45 connectors), IEEE 802.3u
with MDI/MDIX auto-detection
Integrated 802.11b/g WLAN Access Point
WAN VDSL2 Line Interface
Compliant with VDSL2 and support 8a/8b/8c/8d, 17a and 30a
Connection Loops: One (pair wire)
Connector: RJ-11
Analog Voice Interface
2 FXS ports (2 * RJ-11 connectors) for analog phone sets
Indicators
PWR – Green LED indicates power and operation. Red LED indicates failure.
WAN – Green LED indicates broadband connection
Internet – Green LED indicates PPP connection and RED indicates PPP failure
or device in BRIDGE mode.
TEL1 – Green LED indicates phone connection
TEL2 – Green LED indicates phone connection
LAN – Green LED indicates LAN connection
WLAN – Green LED indicates wireless AP enabled
OAM&P
Local: Telnet and Web management
Remote: Telnet Web Management
Environment
Operation Temperature: 0°C ~ 40°C
Operation Humidity: 5% ~ 95%
Storage Temperature: -20 ~ +85°C
Storage Humidity: 5%~95%
Power
AC Adapter: Input 100~240VAC, 50/60Hz; Output 12VDC 1.50A
Certificates
CE, CB (TBD)
Software Specifications
Bridging
Transparent Bridging and spanning(IEEE 802.1D) with at least 32 MAC
addresses
RFC2684 (RFC 1483) Bridged
Bridge filtering with per-port extensions
Routing
IP routing and PPP supported
PAP and CHAP for user authentication in PPP connection
RFC2684 (RFC1483) Routed
MAC Encapsulated Routing (MER)
DHCP client, server and relay agent
DNS relay
Wireless LAN
Supports 802.1x; WEP; WEP2; WPA; WPA2; TKIP; AES; 802.11i
82