Fg101 Front Panel - Inteno FG101 User Manual

FG101 User's Guide

FG101 Front Panel

The front panel of this FG101 will be described here which cover all front panel
definitions of other models.
Figure 2: FG101 Front Panel and LEDs
Connector and LED definitions from left to right:
Label
Power
WAN
Internet
TEL1
TEL2
Ethernet
WLAN
Color Function
GREEN off: No power
Green
GREEN on: Power on
or Red
RED on: Self-test fails
Green On: Physical layer sync up successfully.
Off: No connection or no signal
Blink: Physical sync up progress
GREEN off: No connection to Internet
Green
GREEN on: The device gets an IP address
or Red
successfully in router mode
GREEM blinking: Data being transmitted.
RED on: The device is set as a BRIDGE or can not get
an IP address in ROUTER mode.
Green On: make or receive a phone call
Off: disconnect the phone call
Blink: incoming call (ringing)
Green On: make or receive a phone call
Off: disconnect the phone call
Blink: incoming call (ringing)
Green On: LAN link established and active
Off: No LAN link
Blink: Data being transmitted
Green On: WLAN service is enabled
Off: WLAN service is disabled
Blink: Data being transmitted
4