Inteno FG101 User Manual page 33

FG101 User's Guide
Figure 30: Add - Outgoing IP Filter Setup
Global Setting







By default, all incoming IP packets from WAN are blocked to access PCs in LAN, but
some IP packets can be accepted by setting up filters.
Figure 31: Incoming IP Filter Setup
Enter the Filter Name
Select the Protocol from the selection list.
Enter the Source IP Address and Subnet Mask (range of IP addresses) of packet
Enter the one port or multi ports (port range)
Enter the Destination IP Address and Subnet Mask (range of IP addresses) of
packet
Enter the one port or multi ports (port range)
Click Save/Apply
27