Line 1 Setting - Inteno FG101 User Manual

FG101 User's Guide
Global Setting:











Line 1 Setting

This page allows you to setup the parameters of Line 1 including username, password,
codec, and call features.
Figure 57: VoIP Configuration – Line 1 Setting
Global Setting:

Select the SIP Transport Protocol: UDP or TCP.
Enter the Listen Port number which is a port number of UDP or TCP.
Enter the Maximum Redirect number which is the number that VoIP may allow to
redirect or forward to.
Enter the Failover Retries number of seconds which ISP requests to retransmit if
there is no response received.
Enter the STUN Server (IP address or host name) and Port Number. The STUN
server is used to pass through NAT firewall. The default port number for STUN
application is 3478. Please check with your ISP to get detailed information.
Enter the External IP. It is a WAN IP address on the router which the ATA is
connected for the NAT mapping.
Enter the Keep-alive Interval of seconds. The device sends packet to inform SIP
server periodically.
Enter the Session Expired of seconds. The device will close the session in
seconds after the call is disconnected.
Check to Enable Session Timer Feature.
Click Save to save the configuration
Select to Enable this line or not
49