Advanced - Inteno FG101 User Manual

FG101 User's Guide

Advanced

This page allows you to configure advanced parameters for wireless communication.
Figure 51: Wireless Setting – Advanced
Global Setting










Enable AP Isolation if you do not want AP to be able to communicate with each
other.
Set the Wireless Communication Band. If you do not know it, please it as default.
Select the channel from the list
Set the Wireless Communication Rate, AUTO means to use the highest rate if
possible)
Set the Rate for Multicast Packets, AUTO means to use the highest if possible.
Set the Basic Rate
Set the Fragmentation Threshold values from 256 to 2364 bytes. If the value is
too small, it may cause a result in poor performance.
Set the RTS (Ready to Send) Threshold
Set DTIM Interval. DTIM stands for Delivery Traffic Indication Message. This is a
beacon and is a countdown informing wireless clients of the next window for
listening to broadcast and multicast messages. It is a wake-up interval for clients
in power-saving mode.
Set Beacon Interval. The interval in milliseconds between beacon transmissions.
44