Static Route; Rip - Inteno FG101 User Manual

FG101 User's Guide

Static Route

You could create your own routing entry to configure the data traffic in the network.
Click Add to add entry.
Figure 39: Static Route Configuration
Global Setting





RIP

Figure 40: Default Gateway Configuration
Global Setting



Enter the Destination Network Address and Subnet Mask (range)
Check Use Gateway IP Address and enter the IP address where packet will be
forwarded to.
Check the Use Interface and select it from the list
Click Save to save the configuration
Select the Enable to activate this RIP service
Select the desired RIP version and operation, followed by placing a check in the
'Enabled' checkbox for the interface.
Click Save to save the configuration
33