Inteno FG101 User Manual page 18

FG101 User's Guide
Option
User/Password
LAN Port
DHCP
(Dynamic Host
Configuration
Protocol)
Table 2: Values of Default Settings
Default Setting
admin/admin
Assigned static IP
IP Address address:
192.168.1.1
Subnet mask:
255.255.255.0
DHCP server enabled
with the following pool
of addresses:
192.168.2.10
through
192.168.1.250
(Please be noted that
the default DHCP IP
address pool may be
different in each
firmware version.)
Explanation/Instructions
User name and password to access
the device
This is the IP address of the LAN port
on the device. The LAN port connects
the device to your Ethernet network.
Typically, you will not need to change
this address. See Local Network
section.
The device maintains a pool of private
IP addresses for dynamic assignment
to your LAN computers. To use this
service, you must have set up your
computers to accept IP information
dynamically, as described in DHCP
Server section.
12