NEC N8800-149F User Manual page 39

Hardware modules work while synchronizing and comparing with each other. Even if one
hardware module stops, the server can continue its operation as the service with the other
hardware module.
Even if one hardware module stops, the server can continue operation with the other module. After the
failed module is replaced, the new module will obtain information from the other and resume operation.
NEC Express5800/ft series is a highly fault-tolerant server that achieves continuous computing
operations, data storage mirror, and continuous network connection. It allows you to run
ESX-based applications.
NEC Express5800/ft series achieves continuous computing operations for the ESX and
server-based applications with its redundant CPU processing and redundant memory. It assures
data redundancy through duplication of server data on an independent storage system. These
features eliminate server downtime that is usually caused by network disconnection or trouble
with the I/O controller, Ethernet adapter or disk drive, and support operation of the network and
server applications continuously. While being transparent to application software, NEC
Express5800/ft series achieves high fault-tolerance.
NEC Express5800/ft series detects status changes, errors and other events and notifies Syslog of
these events. If you use an alarm notification tool, you can configure NEC Express5800/ft series
to notify you when certain events occur.
NEC ESMPRO can be installed on the system as a server management solution. NEC ESMPRO,
a GUI-based management tool, allows you to monitor, view, and configure NEC Express5800/ft
series. This tool also supports both local and remote management of NEC Express5800/ft series.
General Description 2-3