NEC N8800-149F User Manual page 136

5-14 Installing and Using Utilities
LAN Monitoring Threshold
Because the NEC Express5800/ft series detects hardware faults on the network in the driver level,
NEC ESMPRO Agent does not monitor line faults. Thus, the value set for "Line fault occurrence
rate" of a [LAN] tab of [NEC ESMPRO Agent properties] in the control panel is not used.
Change of SNMP Community
If the security setting of the SNMP Service of a system, where the NEC ESMPRO Agent is
installed,
is changed from the default "public" to a community name, change the community settings of the
NEC ESMPRO Agent, too.
Log on as a user with root privilege
1.
Move to the directory where the control panel of NEC ESMPRO Agent is stored.
2.
# cd/opt/nec/esmpro_sa/bin
Start the control panel.
3.
# ./ESMagntconf
The Control Panel window appears.
Click [General].
4.
The [General Properties] window appears.
Select a SNMP community name used when you retrieve local machine information in the
5.
[SNMP Community] box. (Select by "↑" key or "↓" key.)
Click [OK] to quit.
6.
The Detail Information of Alert
Detail information of some alert displayed on the alert viewer may be displayed as "Unknown."
Change Settings of File System Monitoring Function
New settings in thresholds of monitoring interval and free space monitoring are not reflected
immediately after they are changed. They are reflected at the next monitoring interval of monitoring
service.
File System Monitoring on the system using NEC EXPRESSCLUSTER
When using NEC ESMPRO Agent in the cluster environment configured by NEC
EXPRESSCLUSTER, there is the following limitation:
If a failover occurs, the settings of the threshold for the empty space monitoring function and the
enable/disable of monitoring of the operating sever are not inherited to the standby server. Make
sure to reset the threshold and the enable/disable of monitoring on the standby server.