Power On - NEC N8800-149F User Manual

Power ON

To power on NEC Express5800/ft series, press the POWER switch (the one whose in-built
LED is lit).
Follow the steps below to turn on the power.
1.
Power on the display unit and other peripheral devices connected to the server.
CHECK:
a UPS, ensure that it is powered on.
2.
Remove the front bezel.
3.
Press the power switch
located on the front panel.
Lift up the acrylic cover in
front of the power switch,
and press power switch of
the front panel.
After a while, the "NEC"
logo will appear on the
screen.
IMPORTANT:
turn off the power before
you see the "NEC" logo
and a character below the
logo.
While the "NEC" logo is displayed on the screen, NEC Express5800/ft series
is performing a power-on self test (POST) to check itself. For details, see "POST
Check" described later in this chapter.
Upon the completion of POST, OS will start.
CHECK:
POST and display the error message. See Chapter 7.
If the power code is connected to a power controller like
Acrylic cover
Do not
If the server finds errors during POST, it will interrupt
General Description 2-21
Power Switch