8-4 System Upgrade
PRE-UPGRADE VERIFICATION
If you add on optional devices onto this equipment, some devices require specific ft server control
software version (s).
If the optional asks for specific version number (s), refer to the following procedure before adding
on the devices.
1.
Confirm the required ft server control software's version, Refer to the sever-accessory User's
Guide, check the NEC website, or contact your sales representative.
2.
Verify the version of the ft server control software on your system.
3.
After confirming it as the available version, add the device onto the server.
For more information on how to verify the version of the ft server control software, refer to the
separate User's Guide (setup) "Confirming the ft Server Control Software Version".