NEC N8800-149F User Manual page 192

8-8 System Upgrade
6.
Firmly hold the handle of the hard disk drive to
install and insert the drive into the slot.
TIPS:
Insert the disk until the lever hook touches
the server frame.
Check the direction of the lever. Insert the
hard disk with the lever unlocked.
7.
Slowly close the lever. When the lever is locked, you
will hear a click sound.
IMPORTANT:
Be careful not to pinch your finger(s) between
the lever and handle.
TIPS:
Check the hook of the lever is engaged with the
frame.
8.
Press the POWER switch to power on.
9.
Install the front bezel.
10.
Refer to "Set Dual Disk Configuration" in the User's Guide (Setup) to set the dual disk
configuration.