Table of Contents
Advertisement
Searching for images using various playback functions
Shuttle viewing/direct shuttle viewing
By turning the shuttle ring during still image playback or
playback/reverse playback, you can change the playback
speed.
1 Turn the shuttle ring during still image playback
Step
(shuttle viewing) or playback/reverse playback
(direct shuttle viewing).
1
High-speed reverse search
2
Reverse speed search (approx. X16)
6
5
7
4
3
Reverse speed search (approx. X8)
8
3
9
4
Reverse speed search (approx. X4)
2
10
5
Reverse speed search (approx. X2)
1
11
6
Still image playback
7
Forward speed search (approx. X2)
8
Forward speed search (approx. X4)
9
Forward speed search (approx. X8)
10 Forward speed search (approx. X16)
11 High-speed forward search
The playback speed varies depending on the turning
•
angle of the shuttle ring.
When you release the shuttle ring, it returns to the
•
center position and the recorder starts still image
playback.
Notice
•
The intended playback speed may not be obtained
when a heavy load is imposed on the recorder or when
the high-speed data transmission is unavailable due to
the use of a DVD/CD , USB memory, or external HDD.
Shuttle hold
Even when you release the shuttle ring during shuttle
viewing, the playback speed is maintained.
1 While turning and holding the shuttle ring at
Step
the angle for the desired playback speed during
shuttle viewing, press the PAUSE button.
2 Release the shuttle ring.
Step
The playback speed is maintained.
•
When you press the PAUSE button again, the shuttle
•
hold is canceled and the recorder resumes still
image playback.
High-speed forward/rewind playback
You can play back recorded images at a higher playback
speed than that of shuttle viewing or direct shuttle viewing.
1 Turn the shuttle ring until it stops while the
Step
recorder is stopped.
Turn the shuttle ring clockwise until it stops: The
•
recorder continues high-speed forward playback.
Turn the shuttle ring counterclockwise until it stops:
•
The recorder continues high-speed rewind playback.
P r e s s t h e S TO P b u t t o n : T h e r e c o r d e r s t o p s
•
playback.
Notice
•
When you change the playback speed while playing
back images recorded at a low recording rate, the
displayed images may be disturbed.
Frame-by-frame playback
1 Turn the jog dial during still image playback.
Step
Turn the jog dial clockwise: Forward frame-by-frame
•
playback starts.
Turn the jog dial counterclockwise: Reverse frame-
•
by-frame playback starts.
Keep turning the jog dial clockwise: Continuous
•
forward frame-by-frame playback starts.
K e e p t u r n i n g t h e j o g d i a l c o u n t e r c l o c k w i s e :
•
Continuous reverse frame-by-frame playback starts.
Stop turning the jog dial: The recorder resumes still
•
image playback.
Notice
•
During frame-by-frame playback in the single
screen display mode, the recorder feeds frames
while searching images from the selected camera.
Therefore, when you turn the jog dial fast, the recorder
may not be able to feed frames accordingly.
•
Noise may appear in the images during playback
using the jog/shuttle.
•
When the frame-by-frame playback is performed in the
split screen mode, images may not be refreshed for a
while.
Search
77
Advertisement
Table of Contents
Troubleshooting
