Table of Contents
Advertisement
Recording (continued)
Making recording settings automatically
When you defi ne the normal recording cycle, the recorder
automatically sets the picture quality and FPS for normal
recording.
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [Recording setting].
Step
Recording setting
The <Recording setting> screen is displayed.
•
3 Select [Setting] next to [Auto setting].
Step
Setting
Select [Next] on the <Recording setting Auto>
•
screen.
4 Select [Execute].
Step
W h e n y o u s e l e c t [ E x e c u t e ] , t h e r e c o r d e r
•
automatically detects the cameras from which it is
receiving video signals.
When the transparent setting (
•
disabled, you cannot view images. Change the
setting, as needed.
When the detection is completed, select [Next].
•
The <Defi ne the normal recording cycle> screen is
displayed.
Defi ne the normal recording cycle
5 Set [Recording duration], [Recording time per
Step
day], and [Picture size].
Picture quality and FPS are automatically set for
•
the cameras detected in step 4 and a confi rmation
screen is displayed.
When you set the recording duration to 2 years,
•
images are recorded in the long recording mode,
where FPS is set to 3 or less to prolong the
recording duration. However, the recording and
playback picture quality decreases. Images recorded
in the long recording mode are delayed to be
displayed during playback or they are degraded
during variable-speed playback such as high-speed
playback.
54
<Auto setting>
or
Camera check
page 109) is
When the setting is completed, select [Next].
•
The <Confirm the recording settings> screen is
displayed.
Notice
•
When you use the auto setting, <Audio recording>
setting is not reflected. The setting values based
on the designated condition are assigned to image
recording only. When <Audio recording> is set to
active, estimated time displayed on the screen
becomes shorter.
Confi rm the recording settings
6 Check the recording settings and select [Next].
Step
The settings you make in this procedure are applied
•
to normal recording.
The picture quality and FPS are same among all the
•
cameras detected in step 4.
To change the settings, select [Return] to go back to
•
the screen in step 5.
When the confirmation is completed, select [Next].
•
The <Apply settings> screen is displayed.
Apply new settings
7 Select the recording pattern from [Recording A]
Step
to [Recording D] to which you want to apply the
settings and then select [Execute].
The automatically confi gured settings are applied to
•
the selected recording pattern.
[Recording A]: Used for manual recording and timer
recording.
[Recording B] to [Recording D]: Used for timer
recording.
Advertisement
Table of Contents
Troubleshooting
