Download Print this page

Advanced Searching - Mitsubishi Electric DX-TL2500E How To Use Manual

Hide thumbs

Advertisement

Mitsubishi Digital Recorder - How to Guide

Advanced Searching

Note: While you are in the SEARCH mode the DVR will continue to record.
The recorder will beep to let you know you've completed each task successfully.
Step 1.
To enter the SEARCH mode.
Open the front panel, and to the right of the middle you
will see a group of 9 buttons.
To search for a recorded time
period – press the [
If TIME DATE SEARCH appears on screen, move to Step 2.
Else depending on the last type of search method used, various search menus may appear.
Press [
SEARCH
Using the [
JOG DIAL
SEARCH TYPE will flash.
Using the [
JOG DIAL
] clockwise. Now turn the [
TIME DATE SEARCH menu. Now move to Step 2.
Step 2.
The TIME DATE SEARCH menu will now appear on your display monitor.
You will notice [
The [
>>
] arrows represent what line of the menu you are about to
edit. At the moment this will be the Date / Time that you wish to find.
Below this there is:
[
START
[
END
] - this is the end point of all recorded time.
Note that you can only search between the START and
END Date / Times shown.
Step 3.
To SEARCH you now need to enter a Date / Time.
Do this by turning the [
~ Now the DAY will be highlighted.
To edit the DAY turn the [
~ Now the DAY will be flashing.
To change the value of the DAY turn the [
increase the day or anticlockwise (to the left) to decrease the day.
Once you have selected the correct DAY that you wish to search, turn
the [
SHUTTLE RING
will be highlighted once again.
~ You have now selected the DAY that you want to search in.
Step 4.
Next you will need to select the MONTH. At present the DAY is highlighted.
To select the MONTH you need to turn the [
~ Now the MONTH will now be highlighted.
To edit the MONTH turn the [
~ Now the MONTH will be flashing.
To change the value of the MONTH turn the [
or anticlockwise (to the left) to decrease the month.
Once you have selected the correct MONTH that you wish to search in, turn the [
clockwise once again, and the flashing will stop and will be highlighted once again.
SEARCH
] button.
] a second time to enter the SEARCH SELECTION menu.
], select SEARCH TYPE, and then turn the [
], select TIME DATE, and then turn the [
SHUTTLE RING
>>
] next to the start of the Date and Time.
] - this is the start point of all recorded time.
SHUTTLE RING
] clockwise (to the right) once.
SHUTTLE RING
] clockwise once again, and the flashing will stop and the day
SHUTTLE RING
SHUTTLE RING
SHUTTLE RING
] anticlockwise, to go back to the
] clockwise (to the right) once again.
JOG DIAL
] clockwise (to the right) to
JOG DIAL
] clockwise (to the right) once.
] clockwise (to the right) once again.
JOG DIAL
] clockwise (to the right) to increase the month
Page 2
] clockwise. The
SHUTTLE RING
]

Advertisement

loading

  Related Manuals for Mitsubishi Electric DX-TL2500E

This manual is also suitable for:

Dx-tl950e250Dx-tl800e120