Download  Print this page

Mitsubishi Electric DX-TL5716U User Manual

Mitsubishi digital electronics dvr user manual
Hide thumbs

Advertisement

DIGITAL RECORDER
USERʼS MANUAL
MODEL
DX-TL5716U
THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
1

Advertisement

Table of Contents
loading

  Also See for Mitsubishi Electric MITSUBISHI ELECTRIC DX-TL5716U

  Related Manuals for Mitsubishi Electric MITSUBISHI ELECTRIC DX-TL5716U

  Summary of Contents for Mitsubishi Electric MITSUBISHI ELECTRIC DX-TL5716U

  • Page 1 DIGITAL RECORDER USERʼS MANUAL MODEL DX-TL5716U THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
  • Page 2 WARNING: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
  • Page 3 AVERTISSEMENT: La fl èche symbolisant l’éclair dans un triangle équilateral a pour objet de tirer l’attention de l’utilisateur sur le fait, qu’ il y a des “tensions dangereuses” non-isolées à l’intérieur de l’enceinte du produit qui peuvent être suffi samment importantes pour conduire au risque d’électrocution.
  • Page 4: Important Safeguards

    Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE RECORDER. Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference.
  • Page 5 16. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. servicing to qualifi ed service personnel. 17. Damage requiring Service Unplug this product from the wall outlet and refer servicing to qualifi...
  • Page 6: Table Of Contents

    Before use / Contents How to use this User's Guide About this User's Guide This manual of this recorder consists of the following two manuals. Installation Manual This manual describes connections of devices as well as functional settings and operations to use this unit. User's Guide (this manual) This manual is for operators of this unit and describes the operating procedures for the basic functions only.
  • Page 7: Caution And Care

    Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage.
  • Page 8 Caution and care (continued) WARNING: The supplied power cord is used for 120 V only. Never connect to any outlet or power supply having a different voltage or frequency. • This unit is equipped with HDD, which is a very delicate device. Therefore, handle this unit carefully. •...
  • Page 9 Installation location and handling • Before you fi rst use this unit, supply power to it for at least 48 hours to charge the built-in backup battery so that the built-in power compensator circuit can be activated. When the battery isn't charged suffi ciently, the built-in clock may go wrong or the unit may not able to recover in case of a power failure.
  • Page 10 Caution and care (continued) • When moving this unit, be sure to turn off the MAIN switch, make sure that the unit is completely stopped, and then unplug the power cord. When this unit is exposed to excessive shock while being energized, the internal electronic parts or HDD may be damaged.
  • Page 11: For Important Recordings

    • Be sure to perform test recording before starting the practical operation of this unit, and also check regularly that the recording is performed correctly according to the settings during the practical operation. • Mitsubishi doesn't compensate for data not recorded or not played back correctly because of a failure occurring in this unit or connected devices during the use of this unit.
  • Page 12 Caution and care (continued) Maintenance of DVD drive (laser pickup) • Dust or dirt on the recording/playback lens causes image disturbance and sound skipping, making it impossible to perform recording or playback correctly. Ask your Mitsubishi dealer for cleaning. Don't use commercially available lens cleaning discs because they may damage the lens. •...
  • Page 13 • It is recommended to confi rm with your network administrator about the network settings in advance. • As this unit is operated through network, you may suffer from damage as follows. (1) Leakage or drain of information through this unit. (2) Unauthorized operation of this unit by malicious third parties.
  • Page 14: Note

    Note Thank you for purchasing Mitsubishi digital recorder DX-TL5716U (hereinafter referred to as “ Product ” ). Before using this Product, please be sure to read the following Software License Agreement with regard to the software contained in this Product (hereinafter referred to as “ Licensed Software ” ). By using this Product, you are agreeing to be bound by the terms and conditions of the following Software License Agreement.
  • Page 15: Software License Agreement

    Software License Agreement This Software License Agreement (“Agreement”) is an agreement between you (“User”) and Mitsubishi Electric Corporation (“Licensor”) with regard to the license to use Licensed Software. Article 1 (Grant of license) Licensor hereby grants to User a nonexclusive, nontransferable license to use Licensed Software. Article 2 (License) 1.
  • Page 16: Adjusting The Built-In Clock

    Adjusting the built-in clock Left-click the mouse to display <Main menu>. You can display <Main menu> also by pressing the SET UP button on the front panel. Select “Setup” to display the <Setup> screen. Select “Setting” next to “Clock and language setting”...
  • Page 17: Playing Back Recorded Images

    Playing back recorded images Press the PLAY button on the front panel. You can play back images even during recording. Press the PAUSE button to pause playback. (Still image playback) Press the STOP button to stop playback. Notice • When you change the multiplexer, playback direction, or playback speed during playback, a black screen may be displayed. •...
  • Page 18: Changing The Screen Mode To Display

    Changing the screen mode to display images from cameras You can change the screen mode to display images on the monitor. Displaying images in the single screen mode Press the button of the camera you want to display. Displaying images in the split screen mode * The numbers shown in the figures indicate the factory-default camera number display positions.
  • Page 19 Notice • You cannot switch the screen mode while the menu screen is displayed. To switch the screen mode, close the menu screen fi rst and then press the camera number button or a split button. Tips • To set the camera number to be displayed in each screen mode, use <Multiplexer setting> in the <Setup> menu. You can set the camera number to be displayed differently for each of output A and output B.
  • Page 20: Searching For The Desired Image

    Searching for the desired image You can search for images by specifying the recording date and time. Press the SEARCH button on the front panel to display <Search menu>. Click the device name under “Play device” (for example, HDD (Emergency)) until the desired device name appears.
  • Page 21 onvenient function Displaying <Search menu> using the mouse Right-click the mouse. The mouse operation screen is displayed. Click the button to expand the menu. Click the Search button ( <Search menu> is displayed. Specifying the search time using the calendar Click “Time and date”...
  • Page 22: Copying Recorded Images

    Copying recorded images You can copy the still image being displayed to a USB memory device or DVD/CD disc as a still or moving image (one-touch copy). This function is convenient to copy recording data for a short period of time. Set a USB memory or a DVD/CD disc in the recorder.
  • Page 23 onvenient function Displaying <Copy menu> using the mouse Right-click the mouse. The mouse operation screen is displayed. Click the button to expand the menu. Click the Copy button ( <Copy menu> is displayed. In addition to one-touch copy, you can copy images using the following methods. For the detailed operating procedures, see the Installation Manual.
  • Page 24 PRINTED IN MALAYSIA...