Table of Contents
Advertisement
[ P i c t u r e ] : W i t h t h i s o p t i o n s e l e c t e d , e - m a i l
notification is sent to the recipient together with
an image captured at the start of alarm recording
as attachment. To use this function, see "E-mail
notifi cation" on
page 97.
[Test Mail]: When you select [send], test mail is sent
to the selected recipient.
Notice
•
Images detected by the same sensor may not be
attached to the e-mail notification messages unless
an interval of at least 5 seconds is given between
transmissions of the messages. Without the interval,
only the notification messages may be e-mailed. In
addition, even images detected by different sensors
may not be attached and only the messages may be
e-mailed unless an interval of at least 3 seconds is
given.
•
A g a i n s t f a i l u r e o f m e s s a g e t r a n s m i s s i o n a n d
undelivered messages, the e-mail function of this
recorder has been designed to implement measures
such as saving e-mail messages temporarily and re-
sending them. However, when a heavy load is applied
to the recorder because of high-quality and high-rate
recording or when the communication line is busy or it
has a problem, the recorder may not be able to notify
of all the detected events. Consider this matter when
incorporating the recorder into an alarm reporting
system or other similar system.
Communication
93
Advertisement
Table of Contents
Troubleshooting
