Changing The Lock Mode From The Password Lock To Simple Lock; Changing The Operation Restriction Level - Mitsubishi Electric DX-TL5716E Installation Manual

Restricting the operations of the recorder (continued)
Changing the lock mode from the
password lock to simple lock
1 Disable the password locks for restricting
Step
operation (Level 1 to Level 3).
2 Clear the registered passwords for Level 1 to
Step
Level 3.

Changing the operation restriction level

You can change the operations restricted in each level of
the password lock for restricting operations (Level 1 to Level
3).
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [Password].
Step
Password
The <Password setting> screen is displayed.
•
3 Select [Setting] next to [Setting the lock level].
Step
Setting
The screen for setting the operation restriction level
•
is displayed.
4 Select operations to be restricted using the
Step
button in each level.
The default settings are as follows.
•
Operation restriction level
Multiplexer /Sequence/E-zoom
Switching to the PTZ mode
Playback/Search/Bookmark menu display
Copy menu display
Warning reset/Self-check
REC/REC STOP/POWER button operation
Timer recording
Recorder information menu display
Setup menu display
Recording setting/Timer program setting/Data protect menu display
HDD registration/Data clear menu display
Password change/Operation restriction level setting
120
or
Operations to be locked
Notice
• The operation control level of Level 3 cannot be set
higher than that of Level 2. The operation control level
of Level 2 cannot be set higher than that of Level 1.
• The Level 3 is applied to the recorder operations listed
below "Recorder information menu display" in the
table.
• You can switch the audio even while the level 1 lock is
enabled.
or