Table of Contents
Advertisement
Using the communication functions (continued)
FTP notifi cation setup
You can make settings for FTP notifi cation.
1 Display the [Main Menu] screen according to
Step
steps 1 to 3 of "Login" on
2 Select [Confi guration Menu].
Step
The [Confi guration Menu] screen appears.
•
3 Select [FTP Settings].
Step
The [FTP Settings] screen appears.
•
4 Make settings of the server for FTP notifi cation.
Step
The current settings are shown in the [Current
•
Settings] area.
To determine the settings shown in a row, select [set]
•
of that row. When you select [Batch Registration],
all the settings shown under [FTP Settings] are
determined.
[FTP Transmission]: You can select whether or not
to issue FTP notifi cation.
[Passive Mode]: You can send data in the passive
mode.
[FTP Server Address]: You can set the FTP server
address.
[User ID]: You can set the user name of the FTP
server.
[User Password]: You can set the password of the
FTP server.
[Remote Path]: You can set the remote path of the
FTP server.
[DNS Server Address 1]: You can set the primary
DNS server address.
[DNS Server Address 2]: You can set the secondary
DNS server address.
[Retry Interval]: You can set the interval of retries
performed when transmission is failed.
[FTP Connection Trial]: You can test the connection
to the FTP server.
94
Step
page 86.
Notice
•
5 Set the trigger and camera number to issue
FTP notification using [Transmitted Image CH
Settings].
To determine the settings shown in a row, select [set]
•
of that row. When you select [Batch Registration],
all the settings shown under [Transmitted Image CH
Settings] are determined.
[Trigger]: You can select the trigger for FTP
notification from among Sensors 1 to 16 and
Emergency.
[Image CH]: You can select the camera for FTP
notifi cation from among Cameras 1 to 16.
Due to a server connection failure or other problem,
events to be notified may be accumulated in the
recorder. In such a case, you cannot test the FTP
connection until the accumulated events are notifi ed.
When the settings related to the notification are
changed during the period between the occurrence
of an event and the completion of notification, the
accumulated events in the recorder may be deleted
without being notifi ed.
Advertisement
Table of Contents
Troubleshooting
