Table of Contents
Advertisement
Setting the partition
You can partition the Main device.
Partition setting
Normal
No partition
recording area
Normal
Allocate alarm
recording area
recording area
Alarm recording area
Normal
Allocate emergency
recording area
recording area
Emergency
recording area
Allocate alarm
Normal recording area
recording area and
Alarm recording area
emergency recording
area
Emergency
recording area
Notice
•
Before changing the HDD operation settings (such as
turning the mirroring ON from OFF or OFF from ON
and changing the partition settings), set the pre-alarm
time of the alarm and emergency recording settings to
0 second. After setting the pre-alarm time to 0 second,
check that the PRE ALARM and ACCESS indicators
go out and then change the HDD operation settings.
•
When you change the HDD operation settings, the
recorded data are deleted.
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [HDD registration].
Step
HDD registration
<HDD registration> screen is displayed.
•
3 Select [Setting] next to [Main HDD setting].
Step
Setting
<Main device setting> screen is displayed.
•
Data to be recorded
Normal recording
Alarm recording
Emergency recording
Normal recording
Alarm recording
Emergency recording
Normal recording
Alarm recording
Emergency recording
Normal recording
Alarm recording
Emergency recording
or
4 Select [Setting] next to [Change partition setting].
Step
Setting
<Partition setting> screen is displayed.
•
5 Create partitions in the Main device.
Step
Set the capacities of the normal recording area,
•
alarm recording, area and emergency recording
area.
When you allocate the alarm recording area and
•
emergency recording area, the specified space
in the HDDs set as Main device is divided to be
used for alarm recording and emergency recording
independently.
Notice
•
When you create partitions, mirroring cannot be used.
•
Functions such as playback, search, information
display, remaining capacity setting (mode-out/call-out)
and deletion of recorded data can be individually set
in each of the normal recording area, alarm recording
area, and emergency recording area.
•
When you copy or archive recorded data, you can
select any of the normal recording area, alarm
recording area, and emergency recording area as
copy source.
•
Preliminary recording is not performed while the
operation settings of normal, mirroring, or partition are
being changed.
Tips
•
When the sum of capacities of the normal recording
area, alarm recording area, and emergency recording
area is 100%, you cannot increase the capacity any
more.
•
You cannot set the normal recording area to 0%.
•
The recording area for preliminary recording is
assigned in addition to the partitions you can set.
This space is assigned even when the preliminary
recording is disabled.
Menu settings/Device registration
41
Advertisement
Table of Contents
Troubleshooting
