Table of Contents
Advertisement
Tips
•
When you press the PAUSE/JUMP TO END button
while the playback is stopped, images around the end
of the latest recorded data are played back in the still
image playback mode. (
searched is different from that searched by the End
point search.)
•
The range of playback may become narrower than
that defi ned by the recording start and end times being
displayed.
•
When the <Search menu> is displayed during
playback, playback stops.
Setting the searching conditions
You can designate a device, camera, and time as search
conditions.
1 Press the SEARCH button on the front panel of
Step
the recorder.
<Search menu> is displayed.
•
You can display this menu also from the mouse
•
operation menu. (
2 Select a device to search under [Play device].
Step
HDD (Normal)
[HDD (Normal)]: Data in the normal recording area
are searched.
[HDD (Alarm)]: Data in the alarm recording area are
searched.
[HDD (Emergency)]: Data in the emergency
recording area are searched.
[ H D D ( C o p y ) ] : D a t a i n t h e c o p y d e v i c e a r e
searched.
[HDD (Archive)]: Data in the archive device are
searched.
[HDD (Preliminary)]: Data in the pre-recorded area
for alarm or emergency recording are searched.
[DVD/CD]: Data on a DVD/CD disc are searched.
[USB memory]: Data in a USB memory device are
searched.
Notice
•
For searching data in the HDD (Preliminary), you can
use time date search only.
•
When the area with its capacity set to 0% in the
partition setting is designated as the playback/search
device, playback and search cannot be performed.
Therefore, select the device available for playback in
[Play device].
Page 78) (The point to be
Pages 32 to 33)
•
When you copy or search the data recorded on a DVD/
CD or USB memory, it may take some time before the
media is completely recognized after inserted. Before
you perform copy or search, check whether the access
lamp of the DVD/CD drive or USB memory blinks.
3 Select the number of the camera you want to
Step
search in [Camera fi lter].
1
4 Designate the date and time to search.
Step
There are 2 methods to designate the date and time
•
to search, one is entering the date and time directly
and the other is designating the date and time using
a calendar.
[To designate the date and time by entering directly]
4
Click on each of day, month, year, hour, minute,
Step
-1
and second on the <Search menu> screen until
the desired value appears.
-
-
20
08
01
12
[To designate the date and time using a calendar]
4
Select [Time and date].
Step
-1
Time and date
The <Set the search start time> screen is displayed.
•
4
Select the year and month to search.
Step
-2
The calendar of the selected year and month
•
appears.
?
Set the search start time
4
Step
-2
01/2008
Sun
Mon
Tue Wed
Thu Fri Sat
1
2
3
4
6
7
8
9 10 11 12
4
13
14
15 16 17 18 19
Step
-3
20
21
22 23 24 25 26
27
28
29 30 31
Check data
Search start time
E:Quit
[Check data]: Click to check whether the selected
device contains recorded data or not. Dates having
recorded data are displayed in gray and dates
without recorded data are displayed in black.
When recording data exist on the last day in the
selected month, the data of the same month in other
areas are not detected.
4
Select the date to search.
Step
-3
4
Select the hour and minute to search.
Step
-4
4
Select [Execute].
Step
-5
The date and time designated in steps 4
•
displayed as the search start time and the <Search
menu> screen is displayed.
:
:
00
00
00
Hour
0
1
2
3
4
5
5
6
7
8
9 10 11
12
13
14 15 16 17
4
18
19
20 21 22 23
Step
-4
Minute
00
05
10 15 20 25
30
35
40 45 50 55
01-01-2008
10 : 30 : 00
4
Step
D:Execute
-5
to 4
are
-2
-4
Search
73
Advertisement
Table of Contents
Troubleshooting
