Registering the devices (continued)
Registering external HDDs
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [HDD registration].
Step
HDD registration
<HDD registration> screen is displayed.
•
3 Select [Setting] next to [HDD registration].
Step
Setting
<HDD registration> screen is displayed.
•
4 Select [Setting] next to [Register external HDD].
Step
Setting
<HDD registration External HDD> screen is
•
displayed.
5 Check that the HDDs connected to the SERIAL
Step
BUS port of the recorder are listed on the <HDD
registration External HDD> screen.
When you select [Check], the ACCESS indicator of
•
the selected HDD illuminates and you can check the
selected HDD.
6 Select whether or not to register the HDDs
Step
connected to the SERIAL BUS port as Main,
Copy, or Archive device.
Copy
[Main]: HDD is registered as Main device.
[Copy]: HDD is registered as Copy device.
[Archive]: HDD is registered as Archive device.
[Not assigned]: HDD is not registered as Main,
Copy or Archive device.
Every time you press the button, the button's function
•
changes among [Main], [Copy], [Archive], and [Not
assigned] in order.
7 Set the order of recording on the registered
Step
HDDs connected to the SERIAL BUS port.
[SBM
] ............. Represents Main device.
•
[SBC01] .............. Represents Copy device.
[SBB
] ............. Represents Archive device.
Set the number shown in
saved in HDDs in the order of numbers you set.
8 Select [Set] to determine your settings.
Step
38
or
SBC01
Set
from 01 to 16. Data are
Notice
•
Data to be archived are transferred in 2 MB units. At
the end of archive, the data of the latest recording
point may not be completely transferred yet. Pay
attention to this matter when you change the archive
source device.
•
The registered information may not be displayed
correctly during recording or playback.