Searching For The Desired Image - Mitsubishi Electric DX-TL308E User Manual

Searching for the desired image

You can search for images by specifying the recording date and time.
1
Press the SEARCH button on the front panel to
display <Search menu>.
2
Click the device name under "Play device" (for
example, HDD (Emergency)) until the desired
device name appears.
You cannot select devices that are not set.
3
Click the camera number under "Camera filter"
until the desired number appears.
4
Click on each of date, month, year, hour, minute,
and second until the desired value appears.
5
Click "Search."
The image recorded on the specified date and time is
displayed on the quarter screen. (Playback pause)
6
Press the button to start playback.
In addition to the time and date search, you can search for images using the following methods.
For the detailed operating procedures, see the Installation Manual.
For searching data in the HDD (Preliminary), you can use time date search only.
Start point search
This function searches for the
oldest recorded data.
End point search
This function searches for the
latest recording data.
16
2
3
4
Search menu
?
1
12-01-2008 Sat
Play device
13:35:17
HDD (Emergency)
Start : 01-01-2008 09:24:31
Execute search
End : 11-11-2008 02:50:08
Execute search
Camera filter
1
- - :
Time and date 01 12 20 08 00 00
Alarm list search Search MD search
E:Exit
Search menu
?
1
12-01-2008 Sat
Play device
13:35:17
HDD (Emergency)
Start : 01-01-2008 09:24:31
Execute search
End : 11-11-2008 02:50:08
Execute search
Camera filter
1
- -
Time and date 01 12 20 08
Search
Alarm list search
E:Exit
Alarm list search
This function searches for images using
the list of times and dates when alarm
recording and emergency recording
: started.
00 Search
MD search
Search
This function searches for images from
a camera that detected motion.
1
6
5
: :
00 00 00 Search
Search
MD search