Table of Contents
Advertisement
1.9> HARD DRIVE SETUP
To enter the HARD DRIVE SETUP menu, press the SELECT button. A sub menu
shows as follows,
>
OVERWRITE ENABLED
MASTER HDD SIZE
MASTER HDD USED
MASTER HDD FORMAT
SLAVE HDD SIZE
SLAVE HDD USED
SLAVE HDD FORMAT
This menu displays hard disk drive capacities, used capacities and percentages. It
also allows user to
Format hard disk drive
¡ ½
Setup hard disk drive overwrites.
¡ ½
1. 9.1> OVERWRITE ENABLED
YES: If HDD is full, the recording continues, the recorder will eventually go
into OVERWRITE mode, which means that the most dated data will
be replaced with the new data.
NO: If HDD is full, the recorder will stop recording.
1. 9.2> HDD FORMAT
To format the equipped HDD, user needs to enter password to make HDD
formatted automatically. Factory default HDD format password is "55555".
*Note: To change password, please refer to 2.1 PASSWORD SETUP on
page 10.
1.10> ENTER MENU 2
>
Pressing the SELECT button to enter MENU 2.
HARD DRIVE SETUP
MENU 1
NEXT PAGE (MENU 2)
11
YES
76319 MB
1968 MB
2 %
76319 MB
0 MB
0%
Version 1.2
Advertisement
Table of Contents
